0 Items

3D Touch – bed leveling

30.25 inc. BTW

3D bed level sensor.
High precision up to 0.005mm in most situations.
Suitable for any type of hotbed(it is not magnetic based).

In stock

SKU: GT3D0012019 Category:

Geeetech 3D bed levelling sensor.

  • Simple
    3DTouch can be easily applied since it has a small and simple structure. Gathering information & firmware setting will be an easy task because of 3DTouch works as usual auto bed levelling sensor.
  • Smart
    Self-test: The push pin is operated three times to test when the power is on Alarm: The LED light blinks if a problem found on a self-test or on an operation
  • 3 High-precision
    3DTouch’s Standard Deviation in repeatability is around 0.005mm, at that precise. If you choose 3DTouch, your 3D printer will be a high-class masterpiece, giving you an enjoyable experience.
  • Innovative Solenoid: Ultra Power Saving
    On idle state, while the push-pin is whether pulled out or retracted, there are not any electric current flowing on the solenoid, and standby electric current in the whole device is below 15mA on average, whereas on the working state, while the pin is moving in sudden about 100ms, under 300mA flows in the device. Low power consumption even further drops joule heating, preventing from heat problem.
  • Technologies
    3DTouch consists of Atmel ATtiny13A, solenoid, and a push pin.
  • wide Selection of Bed
    3DTouch does not use either optical nor proximity (inductive/capacitive) sensor. 3DTouch is controlled by Hall Effect, providing high precision. Thus the bed material can be selected freely.
  • Optimized structure: Larger Build Size
    3DTouch is a small and technology-intensive one. Build size can be set larger than other existing auto bed levelling sensor. 3DTouch uses existing RC Servo motor signal intact, so just plug 3DTouch on the same pins after removing servo motor.

Additional information

Weight 0.5 kg
Dimensions 25 × 15 × 5 cm
Accuracy

up to 0.005mm

Brand

Geeetech

Reviews

There are no reviews yet.

Be the first to review “3D Touch – bed leveling”

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Geeetech 3D bed levelling sensor.

  • Simple
    3DTouch can be easily applied since it has a small and simple structure. Gathering information & firmware setting will be an easy task because of 3DTouch works as usual auto bed levelling sensor.
  • Smart
    Self-test: The push pin is operated three times to test when the power is on Alarm: The LED light blinks if a problem found on a self-test or on an operation
  • 3 High-precision
    3DTouch’s Standard Deviation in repeatability is around 0.005mm, at that precise. If you choose 3DTouch, your 3D printer will be a high-class masterpiece, giving you an enjoyable experience.
  • Innovative Solenoid: Ultra Power Saving
    On idle state, while the push-pin is whether pulled out or retracted, there are not any electric current flowing on the solenoid, and standby electric current in the whole device is below 15mA on average, whereas on the working state, while the pin is moving in sudden about 100ms, under 300mA flows in the device. Low power consumption even further drops joule heating, preventing from heat problem.
  • Technologies
    3DTouch consists of Atmel ATtiny13A, solenoid, and a push pin.
  • wide Selection of Bed
    3DTouch does not use either optical nor proximity (inductive/capacitive) sensor. 3DTouch is controlled by Hall Effect, providing high precision. Thus the bed material can be selected freely.
  • Optimized structure: Larger Build Size
    3DTouch is a small and technology-intensive one. Build size can be set larger than other existing auto bed levelling sensor. 3DTouch uses existing RC Servo motor signal intact, so just plug 3DTouch on the same pins after removing servo motor.
Join wachtlijst Wij informeren u wanneer het product op voorraad komt. Laat hieronder uw geldig e-mailadres achter.
Email Quantity Wij zullen uw adres niet delen met iemand anders.